[Adviser] [Networker] Survivor

Keenan

New member
Name of the Expert Advisor: Survivor
Year of release: 2017
Currency pairs: EURUSD, GBPUSD, USDCHF, USDJPY
Timeframe: M5
Trading time: around the clock
Description: trend Expert Advisor with the possibility of martingale



Monitoring in Robotest

Spoiler alert

Start: 22.01.2017, 27.07.2017 version 1.3.7 is delivered
On monitoring there are sets from the zero post of the topic

c3ef7c422a9c51b242751740a6707b0c.png

8f47e8860db9d9391a666634e9bcfe26.png


a69d69475e78cbbcc2dfa06fbeb4af6b.png

7e160e91b96840402e1ad2a193af4916.png



ec69ac4a5040485a5af4c7d3998d672b.png


 

Attachments

  • survivor_+_sets.zip
    11.9 KB · Views: 0
  • survivor_1.3.5_+_sets.zip
    13.7 KB · Views: 0

Rosemary

New member
I present to your attention my sets for the MT5 platform.
The sets are honed with the help of Walk forward optimization, i.e. they are focused on the future.-)
The main set-EUR/USD and two additional USD/CHF and USD/JPY have an accuracy of about 90%.

The shelf life of the sets is 6 months from the moment of creation, i.e.-01.12.18 to 01.05.19
The profitability ratio for half a year will be from 2 to 8.
 

Krew

New member
1. So the last stage of optimization is the last 12 months?
2. Judging by the sets, have all the ticks been optimized? If so, how long does it take(on what hardware?), if the cloud, then how much did it cost, if not a secret.
 

Rosemary

New member
It turns out that Optimization+Forward+Test, where O=8 months F=4 months T=6 months.
the calculation was done on the farm from FX8350+i5 5200+i5 6200
The calculations themselves are equal to O=8 F=4 T=6 to do 6 hours, but the calculations that would find out the duration of O=? F=? T=? it is necessary to do 7 days on my farm and this is only for the 1st pair.
It is still possible to change the global trend after which it is necessary to search for the duration O F T again.

All ticks were used, because counter. t. give a false result, and this is understandable because take profit = 10 points
 

wow94viko

New member
And you can go into more detail about the false result. And "counter. t." means apparently "every tick is based on real ticks"?
 

Giselle

New member
Good afternoon!The Expert Advisor opens 10 orders at an interval of several seconds at almost the same price.There is a version of SurvivorMT5 (1.3.7.) Fixed_3. Tuzotawa sets.
 

Attachments

  • survivor.jpg
    survivor.jpg
    144.7 KB · Views: 0

Krew

New member
tuzotawa uses the all ticks mode, it is not surprising that the opening prices of positions are very close in terms of prices and time. In the original (MT4)by default, the code specifies only the opening price mode, i.e. only the first tick of a new bar(in this case, M5) is executed. If you want positions to be opened every bar, and not every tick, then set the parameter " Mode of operation of the Expert Advisor on the account and during testing. = Only open prices"(as in the original MT4), or set the _Step_Input parameter other than zero(this is the price step from the previous trade).
 

Rosemary

New member
I noticed one error in SurvivorMT5 (1.3.7.) Fixed_3-11.02.19 the bot was trading without looking at the ban of togrovli on Monday equal to 300 minutes.
Also, the bot made 30 trades in 3 candles, which is 3 times higher than I planned.
And as pologaetsya the last 10 closed in the negative.
The father-in-law of the code appeared "signal" and formed-the trades were able to close, and when the signal weakened, but still fit the conditions, the trades closed at a stop loss.
I think we need to come up with a mechanism to protect against this. For example, pause for N candles after " subsequent entries"
 

Attachments

  • 12.png
    12.png
    16.8 KB · Views: 0

Krew

New member
If you open "Trades" in the terminal history and activate the "Comment" column, there will be a message with the counter of the position number |SELL_1,|SELL_2|SELL_3, etc. Was there a message with the number |SELL_11 - |SELL_30 ? Or 30 deals were opened, but within the limits of |SELL_10.

Added: 13-02-2019 11: 38: 18



It is not clear why, I put a couple of checks, if there is something like this, there will be errors in the log.

It is implemented as follows. I added the parameter "Period_Indicators", we leave it in the mode of 5 minutes, and we switch the EA settings to the mode"Only open prices". In the tester (on the chart), we choose a timeframe based on what kind of pause we want, let's say 1 min., The spectrum of the taimframe in MT5 is rich, you can choose almost any one. The mode of operation of the tester can be selected "All ticks" after working out the closing of narrow TP.

I looked at it in the tester, and this is about how it should be. The MaxOrders parameter limits the number of open positions, not the number of trades starting from the first one. That is, if 10 positions were opened and three of them were closed and at the same time a buy signal appeared again (which often happens with a narrow channel and a narrow TP), then three more transactions will open under the number 8,9,10 total:13 since the first one opened. And if there is a "flounder" and some of the transactions can not be closed, then the total pool of transactions relative to the first one can significantly increase.

Added: 13-02-2019 11: 39: 02

 

Attachments

  • survivormt5_1.3.7_f_4.zip
    143.7 KB · Views: 0

McNeil

New member
Hi , and what is only under MT5 now this topic, for MT4 development is no longer being conducted?
 

McNeil

New member
In my opinion there is not enough in the owl:
1.) Slippage
2.) Time sessions in an expanded form ( by day of the week), a screen is attached
3.) The normal implementation of the trade in time, the screen is attached
4.) add a volatility indicator (as a filter), the scheme is simple, allow trading when the volatility is large or only small, I use the combined indicators of the APR and Envelope in manual trading, we have a description of the work on the forum , I can provide a link if necessary, since the problem of this bot , and almost all of it, is that it fails in certain places with low volatility (flat) and also does not see high volatility in places of a good trend (pullbacks) or on trend areas, it usually there also gets involved, yes, in the owl there are many indicators as filters for entry, someone will say, oh, well, the filter filters another filter as much as possible, but as practice shows, it is a set of combinations of certain indicators that a good entry appears, you just need to add an item for each indicator present in the owl
5.) turn on / off and in the opt already achieve the optimal set
I do not implement my wishlist, this should help, again, in my opinion, in improving the work of this Expert Advisor, we assume, and God has it, just notes when testing an ordinary person
 

Attachments

  • 2.png
    2.png
    10.4 KB · Views: 0
  • без_имени.png
    без_имени.png
    95.6 KB · Views: 0
  • 1.png
    1.png
    9.5 KB · Views: 0

Crawford

New member
I once made the 2nd version of the Expert Advisor, cleaned up the settings a little, and even cut the che. Then I forgot about it.
maybe someone needs it for improvement, I attach the open source code.
 

Rosemary

New member
After updating MT5 to the 2007 version, the settings of the Parameters were reset to the default ones.
If you open the tester load sets in the Parameters tab, go to the Settings tab, and then back to the Parameters, then the settings are reset to default. In the net, I found a similar branch for 2017, it says that this is due to global variables, but this solution did not help me:(
 

Krew

New member
The 2005-2007 versions turned out to be very buggy, but I do not have such problems (several terminals). Try to take down the terminal and install it again (there are a lot of updates, it may have become crooked), or wait for updates.
 

Arellano

New member
Fellow traders, hello!

Help the beginner, please.
There are several questions about this adviser, I did not understand it myself.

There is a desire to use this Expert Advisor (so far on the wrapper), but I do not understand how to set it up correctly. I was impressed with the results of the tests when the Expert Advisor works in the dynamic lot mode, but how do I enable it?
I can see the "Risk" parameter in the set, but is this it or not? Or is there something else that needs to be changed? I plan to set the risk at the recommended level of 2-3%.

Another point. In articles on the site and on the forum, I come across the calculation of risks depending on the currency of the account. I want to test the Expert Advisor on accounts in euros and dollars, hence the question: do I need to change something in the sets to the Expert Advisor?

And one more thing. Tell me, how is it better to withdraw profit from this type of Expert Advisor? If with "Martin", it is approximately clear, then how to be here? Should I restart the terminal after withdrawing the profit from the account? How often can I withdraw my profit? Can I do this if the EA has not yet closed the order grid?

And a question from the category of "just in case". Tell me, I understand correctly that the maximum profit can be achieved if on one account, in one terminal, three tabs with recommended currency pairs are opened at once, each of which has its own expert Advisor with the desired set? Well, the "magic" of each adviser should be different, right?

Well, if someone is not too lazy and not sorry, share your set files for this Expert Advisor. In the most ideal case: with explanations of how and how the settings differ from those presented in the archive with the Expert Advisor. I will be very grateful! For understanding the essence of the processes is not enough.

Thank you in advance!
 

Brian

New member
Rosemary said:
It turns out that Optimization+Forward+Test, where O=8 months F=4 months T=6 months.
the calculation was done on the farm from FX8350+i5 5200+i5 6200
The calculations themselves are equal to O=8 F=4 T=6 to do 6 hours, but the calculations that would find out the duration of O=? F=? T=? it is necessary to do 7 days on my farm and this is only for the 1st pair.
It is still possible to change the global trend after which it is necessary to search for the duration O F T again.

All ticks were used, because counter. t. give a false result, and this is understandable because take profit = 10 points
What algorithm does you use to calculate the duration of O, F, T?
 

Prince

New member
Hello everyone!
Can I ask the specialists a question?
I put it as the expert Advisor advises here on a demo account with a broker Alpari for 4 pairs with installed sets.
I put it on 5.02.2020. Today 14.02.2020
As it is not very fast he trades. Is that what it's supposed to be?
For all the time on the euro today, the adviser launched the second transaction. There were 4 deals on the yen.
Not one franc at a time.
And only on the pound still as the trade goes. Today, the 20th transaction was completed.
 
Top